Support for CANFD protocol

MUCAR VO7 / MUCAR VO7S

Lifetime Free:Full OBD2 functions and 28 reset Functions

After 3 years Upgrade subscription fee, $99 per year

MUCAR VO7 / VO7S 28 Reset Functions Lifetime Free

🔔Note: not all 28 resets work for all cars, Before place order please check compatibility first. send your car brand model and release year to seller.
for example(Audi,A3, 2020)

1. Oil Reset
Allows you to perform reset for a new calculation of Engine Oil Life system once changed the oil.

2.EPB Electronic Park Brake Reset

It is important in the maintenance of electronic braking system's safety and efficiency.

3.BAT battery service

Use The Car Diagnostic Device To Reset The Car Battery Monitoting Unit To Clear riginal Faut information About insuficient Battery Electric Quantity, And Match The Battery Again And Monitor Battery Based On Current Battery Information.

4.DPF Diesel Particulate Filter Reset

Specially works for Diesel Particulate Filter system with DPF regeneration, DPF component replacement teach-in and DPF teach-in after replacing the engine control unit.

5.SAS Steering Angel Sensor Reset

Helps clear the fault steering angle sensor memories and plays an important role in the steering angle sensor calibration.

6.TPMS Tire Pressure Monitoring System Reset

Makes sense in displaying sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors.(Cars equipped with tire pressure sensors must purchase THINKCAR THINKTPMS G2 to use this function)

7.IMMO Matching

In order to prevent the car from being used by illegal keys, the IMMO matching function enables the anti-theft control system on the car to identify and authorize the remote key, so that the car can be opened and used normally. When the car changes the ignition switch key,ignition switch, integrated dashboard, engine control unit (ECU), body control module (BCM) and remote control battery, the IMMO matching is required.

8.ABS Bleeding

ABS brake bleeding to get a firm brake pad after air exhaustion after repair ABS pump system.

9.Sunroof Reset

The sunroof needs to be reset when the sunroof control unit have communication problem or changed.

10.Suspension Reset

Try reset electronic suspension air ride with the massage system close all doors koeo flip through messages system go to suspension reset or on off.

11.Gearbox (Transmission )Reset

Procedure Reset Transmission Adaptive Learning DIY. Start the car and drive. Once you perform this procedure the Engine Control Unit (ECU) and Transmission Control Unit (TCU) will work together to learn how you drive by monitoring your driving pattern. After you follow this programming method of the TCU / ECU drive the car.

12.AFS Headlamp Reset

'AFS' means Adaptive Front lighting System (at night with the Bi-Xenon headlights) it swivels either side, pressing that button means they stay pointing straight ahead and don't turn when you turn the steering wheel.

13.Injector Coding

Leaking injectors and some dead injectors can be missed even when an injector is disabled. Other problems with the ignition system and mechanical components also may not show an rpm loss when an injector is turned off.

14.Throttle Adaptation

The throttle body is a tube containing a pivoting flat valve (butterfly) that is used to control the amount of air entering an engine. In an electronically fuel injected car, a throttle position sensor and air flow sensor communicate with the computer, which supplies the corresponding amount of fuel needed at the injectors. It must need re-learning throttle sensor position after clearing or repair.

15.Gear Learning

The scan tool monitors certain camshaft position sensors signals to determine if all conditions are met to continue with the procedure for Engine running.

16.EGR Reset

Reduce nitrogen oxides (NOx) in the exhaust gas and improve fuel economy at partial load.

17.A/F Reset

This function is applied to set or learn Air/Fuel ratio parameters.

18.Adblue Reset(Diesel Engine Exhaust Gas Filter)

After the diesel exhaust treatment fluid (car urea) is replaced or filled up, urea reset operation is required.

19.Airbag Reset

This function resets the airbag data to clear the airbag collision fault indicator.

20.Coolant Bleeding

Use this function to activate the electronic water pump before venting the cooling system.

21.AT Learning

This function can complete the gearbox self-learning to improve gear shifting quality. When the gearbox is disassembled or repaired (after some of the car battery is powered off), it will lead to shift delay or impact problem. In this case, this function needs to be done so that the gearbox can automatically compensate according to the driving conditions so as to achieve more comfortable and better shift

22.Language Change

This function is used to change the system language of the vehicle central control panel.

23.Nox Sensor Reset

Nox sensor is a sensor used to detect the content of nitrogen oxides (Nox) in engine exhaust. lf the Nox fault is re-initialized and the Nox catalytic converter is replaced, it is necessary to reset the catalytic converter learned value stored in the engine Ecu.

24.ODO Meter Check

Only supports reading the current mileage of the car, does not support modifying the mileage

25.Stop/Start Reset

This function is used to open or close the automatic start-stop function via setting the hidden function in ECU(provided that the vehicle has a hidden function and supported by hardware).

26.Seat Calibration

This function is applied to match the seats with memory function that are replaced and repaired.

27.Transport Mode

ln order to reduce power consumption, the following functions may be disabled, including limiting the vehicle speed, not waking up the door opening network, and disabling the remote control key,etc.At this time, the transport mode needs to be deactivated to restore the vehicle to normal.

28.Windows Calibration

This feature is designed to perform door window matching to recover ECU initial memory, and recover the automatic ascending and descending function of power window.Free Full OBDII Functions:

1.Read extensive current,pending and permanent codes in OBD system quickly. 2.Clear detected fault codes and turn off the Check Engine Light efficiently. 3.View graphical live data of vehicle's computer module(s) for easy analyse. 4.View the vehicle's operating parameters at the moment a DTC is detected. 5.Read I/M readiness status to have a vehicle inspected for state emissions compliance. 6.Perform O2 sensor test to check fuel efficiency and vehicle emissions. 7.Read the results of on-board diagnostic monitoring tests for specific components/systems. 8.Retrieve the vehicle information of VIN,CINs,and CVNs completely.9.Perform the component Test by allowing initiating a leak test for the vehicle's EVAP systemSupport 126+ Car Brands

More Functions

Auto VIN Scan: Automatically identify the vehicle, and match the proper diagnostic software to run fast and precise car diagnostics.
Live data Graphing: Read real-time data streams from actuators and sensors, and supports 4 PIDs graphed (combined).
One-Click Update: One-click to get newly added functions, vehicle coverage, and bug fix.
Data Record + View History: Once a vehicle diagnosis is performed, the ThinkTool Mini obd scanner, will record every detail of the diagnostic process. you can record/review/playback live data anytime. The History function provides quick access to the tested vehicles and users can resume the last operation, without the necessity of starting from scratch.